Not sure if its possible to configure the alert only for the ATA device, but in RTMT there's an Alert Log Central where you can find some preconfigured alerts. One of them is the NumberOfRegisteredPhonesDropped
If you login to RTMT and go to System--> Tools--> Alert --> Alert Central you can view the preconfigured alerts and you can create custom ones.
You can also choose Tools--> Alert --> Config Email Server you can configure the mail server to use and under Alert--> Config Alert Action you can configure which alert you want to notify and add the recipients.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...