Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

automate sip phones integration into cucm 8.x

Hi ,

I must configure more than 100 cisco spa 500 and 300 phones into cucm 8.x as third party phones (SIP) and need to know if there is a process to automate the integration of these phones in cucm 8.x?

Thanks!

5 REPLIES

automate sip phones integration into cucm 8.x

HI Roger,

Is Automatic Registration  (with specific rnage of Directory numbers, option under CCM) enabled option doesn't serve this purpose?

Thanks,

Anand

Please rate helpful posts !!

automate sip phones integration into cucm 8.x

How are you adding this phones to CUCM? Third Party SIP Devices?

I think using BAT is your best option to go.

New Member

automate sip phones integration into cucm 8.x

Hi Thomas,

i add the phones in CUCM as Third Party SIP Devices manually.

What is BAT?

automate sip phones integration into cucm 8.x

Hi Roger,

BAT: Bulk Administrator Tool

https://learningnetwork.cisco.com/docs/DOC-4162

Hope it helps.

Anand

Pls rate helpful posts !!

Re: automate sip phones integration into cucm 8.x

BAT Stands for Bulk Administration Tool. It allows you to import a large amount of Devices by the use of Excel and Spreadsheets that you later on import on the CUCM.

This way you only need to provision the information on the Spreadsheet and BAT will create all the phones for you.

393
Views
0
Helpful
5
Replies