Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

automatic dial with CME

hello I would like to configure an automatic dial to an ip phone when I pick-up the handset from an intercom (in the street) on a CME platform.

Is it possible ans which is the config

thanks

regards

1 REPLY
Super Bronze

Re: automatic dial with CME

Hi

The feature you are talking about is called 'PLAR' or Private Line Automatic Ringdown...

If you want to start teh automatic dial from an IP Phone, use the intercom command:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a0080611355.html#wp1050890

Alternatively, if you have an analogue phone in the street you want to start the auto dial, set this on the voice port:

voice-port 1/0:1

connection plar 2000

Hope this helps...

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
533
Views
0
Helpful
1
Replies