Unity 4.0.3. I do have 2 Unity servers. 1 with VM only and the other one UM. I do have over 100 call handler programmed in VM corresponding to a site. In case that this Unity server fails, I would like to have those call handler transfer to the UM server, but not the regular forward of the subscribers (licensing issue). So I did tests a CTI route point,(forw all to VM) but unfortunatly, it doesn't take the forward no answer when VM server is down. It takes the forw no answer of the port itself. Did try with pilot point and hunt group and got the same results. Does anyone have any idea on how to do that?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...