Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Binding two Upgrade Files

can anyone explain the process of Binding two files. I downloaded Presence 7.0. I bind the two files part 1 and part two (copying the binding statement directly from cisco Doumentation). The Process completes successfully. The oringinal Part 1 of 2 files has incresed in size but reatins it's original name. Shouldn't the process Rename the file dropping the Part1 of Two. Am i doing something wrong. Running a check sum of this file results in a correct check sum?

7 REPLIES

Re: Binding two Upgrade Files

You basically download the files Part 1 and Part 2. Then copy and paste the command into the CMD prompt window on your windows machine. It will then merge the (2) files into one. I think the end result is about 2.x gigs? something like that. It works. See the read me file where you download the file from in CCO. it will have the copy/paste command for the merge.

Cisco Employee

Re: Binding two Upgrade Files

no, it should not change the name just because, you define the name

COPY /B File1+File2 Dstfile

ie:

COPY /B UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part1of2+UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part2of2 UCSInstall_UCOS_6.1.2.1000-13.sgn.iso

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Binding two Upgrade Files

Or:

Step 1 Download the two UCSInstall files from Cisco Connection Online.

Step 2 Execute one of the following commands to reunite the two parts of the file.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.3.10000-63.sgn.iso_part1of2 UCSInstall_UCOS_7.0.3.10000-63.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.3.10000-63.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the CLI to combine the two parts:

COPY/B UCSInstall_UCOS_7.0.3.10000-63.sgn.iso_part1of2+UCSInstall_UCOS_7.0.3.10000-63.sgn.iso_part2of2 UCSInstall_UCOS_7.0.3.10000-63.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

•b8530b1230aa6881d281afcd75d282c9 UCSInstall_UCOS_7.0.3.10000-63.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cups/7_0_3/rel_notes/cup7xrn.html

New Member

Re: Binding two Upgrade Files

One further note... I had to manually rename the binded file to UCSInstall_UCOS_7.0.3.10000-63.sgn.iso. Copying the command did not rename the file once the two parts binded. It left the "_part1of2" in the filename. When I renamed the file without "_part1of2" the upgrade file could be recognized.

Thanks for all of your help!

New Member

Re: Binding two Upgrade Files

How did you run the checksum on the combined iso file? I'm having trouble running my upgrade. It keeps failing. It does download my files okay, but when I go to run it, even with or without a reboot at the end, it gives me an error.

Okay, so I've done all the checksums to both the part 1 and part 2 files individually and then I ran one against the combined iso file...thoughts?

Hall of Fame Super Red

Re: Binding two Upgrade Files

Hi Ginger,

You need to run an MD5 check against the downlaoded file to make sure it matches with what is listed on CCO. Here a couple of free ones;

http://www.softpedia.com/get/System/File-Management/MD5-Check.shtml

http://www.fastsum.com/press/md5-checker.php

Hope this helps!

Rob

New Member

Binding two Upgrade Files

i tried running the following command on Linux and i got the error below

cat UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part1of2 UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.2.1000-13.sgn.iso

ERROR:

Invalid command, the ">" character is not permitted for this command

one other thing. if im running the above command on the linux server, then that means both parts of the file needs to be stored on the serer itself? please confirm..

631
Views
7
Helpful
7
Replies