I'm working with a CUCM version 6.0 that has a special configuration between 2 different Devices, Boss with Mac 8EFA and Assistant with Mac B3E4.
Example a Device (MAC 8EFA) has 2 Directory Numbers (6004, and 16004), the DN 6004 has a forward two 6922, also when saw the DN Information for 6004 has two different Associated Devices (MAC 8EFA and B3E4).
The Secretary Device has only two Directory numbers (6625 and 6922).
When someone call to DN 6004 (Boss) the call is forward to DN 6922 (secretary), but when the user of DN 6004 is on line the Secretary looks a Led ON in his Phone that indicate that the Boss is on the Line.
I try to copy this configuratión for other set of Device, the problems is when i try to add a second Device on the Boss DN, I can't do it.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...