1. Assign a DN in Unity to the public distribution list All Subscribers. We have 3 networked Unity servers, so I used a specific naming standard for the DNs. Example, for one Unity server that is node 30, I used the 30 as the first two digits and appended the extension 99991.
2. From the Octel, send a voice message to the node number of the Unity server with the extension of the distribution list All Subscribers, in this case 3099991.
3. For other Unity servers, I made the DN of the All Subscribers distribution list 3199991 and 3099991 respectively.
4. Note - this presumes you already have your Octel and Unity network defined on the Bridge.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...