Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Broadcast Hunt Groups on UC520

Hello All,

          Are Broadcast hunt groups supported on the UC520 in the latest release?  Thanks

Jason

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Broadcast Hunt Groups on UC520

Hello Jason,

In Cisco Unified CME 4.3 and later versions you can use SCCP phones with the voice-hunt group

You can configure those hunt groups like this:

voice hunt-group X parallel

pilot XXXX

list XXX, XXX,

final XXX

timeout X

This type of hunt group (parallel) should ring all the phones at the same time.

Gabriel.

1 REPLY

Re: Broadcast Hunt Groups on UC520

Hello Jason,

In Cisco Unified CME 4.3 and later versions you can use SCCP phones with the voice-hunt group

You can configure those hunt groups like this:

voice hunt-group X parallel

pilot XXXX

list XXX, XXX,

final XXX

timeout X

This type of hunt group (parallel) should ring all the phones at the same time.

Gabriel.

351
Views
0
Helpful
1
Replies