Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Broadcasting to all stations on the 7941 system

For the purposes of emergency notification, is there a way to broadcast over the speaker/intercom to all phone sets not in use on a 7941 system?

5 REPLIES
Cisco Employee

Re: Broadcasting to all stations on the 7941 system

what are u using?

CUCM or CME? version?

please provide that information also in the future

javalenc

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Broadcasting to all stations on the 7941 system

Arghh delay, those other projcets.

We are using the CUCM version.

Cisco Employee

Re: Broadcasting to all stations on the 7941 system

CUCM 6.x only provides intercom as a 1:1 feature, it doesn't have configured a paging feature

you can try Berbee's informacast for that putpose.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Broadcasting to all stations on the 7941 system

Uhhh not familiar with Burbee's infocast, where can I find more information about this?

Cisco Employee

Re: Broadcasting to all stations on the 7941 system

InformaCast®

http://www.berbee.com/public/berbeesoftware/InformaCast.aspx

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
206
Views
0
Helpful
5
Replies
CreatePlease to create content