Does anyone know of a way to bulk add devices for ownership to an Application User in UCM 7? This is for JTAPI control. We have over 1000 devices we want the JTAPI App User to own and control for Ops Manager.
That's a decent solution, thanks. But my customer was looking for a way to do this in BAT since that is their experience. I think you could do this with a BAT file and Phone Update but I'm not sure if the BAT insert for the User ID or Owner User ID would see the Application users as well as the General Users.
Does anyone know if the BAT insert would read or "see" the Application Users as a valid entry?
Yeah, sorry - assumed you'd realised BAT wouldn't do it and that's why you posted..
The other way would be to export the app users using the BAT export/import function, open the tar file, edit the CSV and re-import it; however with that many device associations you'd need to have something that could handle thousands of columns (i.e. not excel).
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...