I have a unity cluster that was not configured correctly for HA and all of the ports (144) are assioated to the publisher.
Is there a better way of changing the server on these ports apart from logging into the server and manually changing each port..
The doc says this but surely there is a faster way ?
To Configure the Voice Messaging Ports for a Cisco Unity Connection Cluster
Step 1 In Cisco Unity Connection Administration, expand Telephony Integrations, then select Port.
Step 2 On the Search Ports page, select the display name of the first voice messaging port in the Cisco Unity Connection cluster.
Step 3 On the Port Basics page, in the Server field, select the name of the applicable Cisco Unity Connection server depending on the port function. For details, see the “Voice Messaging Port Configuration for a Connection Cluster” section on page 8-1.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...