Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bulk Import when Customer has Unified Messaging

I just want to see what the easyest way to import 500 users when a customer has an existing Unified Messaging VM and the users are already created in AD and Exchange, they only need to have VM accounts setup.

Please verify id I only need to use .csv file with the following parameters:

ALIAS, DTMF_ACCESS_ID

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Bulk Import when Customer has Unified Messaging

No there are at least 3 and you really should use 4

read this section carefully.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/402/administration/guide/ex/SAG_0160.html#wp1184079

rlp

5 REPLIES
Silver

Re: Bulk Import when Customer has Unified Messaging

Be happy to help.

You are correct these are the minimum 3 fields needed for bulk import to work. Just remember the subscriber are going to be created with the default template.

One other thing. I am not cleare as to the existiong UM VM and needing to set up VM accounts. Do you mean the AD and Exchange accounts are set up and you only need to import?

rlp

Silver

Re: Bulk Import when Customer has Unified Messaging

I was wrong, didn't read your post clearly. I am looking up the correct fields now.

New Member

Re: Bulk Import when Customer has Unified Messaging

Yes, I only need to import the users, they are already setup in AD and Exchange. You said that there are 3 fields minimum, Could you please let me know those three, I thought only two, ALIAS and DTMF_ACCESS_ID

Silver

Re: Bulk Import when Customer has Unified Messaging

No there are at least 3 and you really should use 4

read this section carefully.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/402/administration/guide/ex/SAG_0160.html#wp1184079

rlp

Silver

Re: Bulk Import when Customer has Unified Messaging

Since you do have the users in AD and exchange you do have to use all 4 fields. If not duplicate accounts might be created.

rlp

111
Views
0
Helpful
5
Replies