A customer where we installed Call Connector (Personal Edition) on has had issues with a secure web-site. Apparently the 'magic marker' does a 'no-no' when it parses the html code for phone numbers, and thus locks up the web-app. I instructed them to disable the 'Magic Marker' highlighter as i suspected it was causing a security breach in the application. This fixed the problem but the customer must manually disable and enable the 'marker' every time they change websites.
Is Cisco aware of this small issue? What can we tell customers and what work arounds might there be?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...