Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Forward from 0 to different numbers

I need to find a way to enable callers to 0 out of the Greeting message and then have a number called, then if that number does not pickup the next number is called and so forth until we are at the end of an escalation list.

I can 0 out and send to one number but then that numbers line settings takes over.

Any ideas?

5 REPLIES
Cisco Employee

Re: Call Forward from 0 to different numbers

have you tried sending the 0-out to a hunt pilot that's associated to a line group of the phones you want to ring??

or to a pilot point if using AC?

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Call Forward from 0 to different numbers

I thought hunt lists were only for Unity? I have defined a Hunt List and Group and Pilot but the status of the List always shows Not Found.

I have the Pilot number defined as the number to call in Unity on the 0 input and still the Hunt Pilot does not register.

Cisco Employee

Re: Call Forward from 0 to different numbers

reset the hunt list a couple of times, that usually makes it register

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Call Forward from 0 to different numbers

A thing of Beauty - Thanks for your suggestion and help.

Hall of Fame Super Red

Re: Call Forward from 0 to different numbers

Hey Jaime,

Nice thinking on this one :) I was trying to wrap my head around this for a bit and you nailed it! 5 points from this end.

Take care,

Rob

473
Views
5
Helpful
5
Replies