We have an CME 4.1 system. We configured the ephone-dns that when there is no answer after 45 seconds calls will be returned to the reception. Problem is that calls that return to the reception are called Reception in the display. So when i get a call and transfer it to a collegeau who is not on his place, the call does not return to me but to the reception. This makes odd situations possible. When i do not put in an call forward no answer then the call dies after the rings are timed out. So what is the best method for external calls who are blind transfered to someone who is not in the office or does not pick up his phone ?
This is really where to use the setting, Transfer System-Full Consult. This way the users are in control of the Transfer and can pull the call back to deal with it before the Forward No Answer to the Recetionist takes place.
Train the users to do a Consult Transfer rather than a Blind Transfer :)
This only works with a consult transfer and not with an blind transfer i presume ? I already noticed that on the system. There is no other way to do that ? And what about calls that are forwarded and there is no answer with blind transfer, do they allways have to fallback to something or does the call return itself ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...