I was talking to a friend who's pretty into cisco unity connection and he told me this ... I can configure a call handler that will take a message and then broadcast that message to a dist list (fair enough and it works) but also after that try to call a number or several numbers and will leave the VM message in their mail boxes. After which when a person picks up the VM Unity will then erase the VM from the remaining mailboxes that didn't pick up the message.
How this fits in is this ..
I have a group of people (4) and I would like our help desk to call a number and leave a message. I would then like Unity to broadcast out an email to the 4 people, then (or before I don't really care about the order of it) try to call all 4 people and leave them the voicemail message. Once the designated person has picked up the VM it would then erase it from the rest of the peoples VM and voila a half decent solution is born instead of carrying around this rediculous pager we have to carry around.
I know this might not work completely as described above, or maybe it does I'm not sure but I really need some help understanding the flow and config steps ...
Your friend is most correct This is called Dispatch Messaging in Unity Connection;
You can use the dispatch message feature to send a message to a distribution list (from either a call handler or interview handler). The message is configured such that only one user in the group needs to act on the message. When listening to a dispatch message, users are given the option to accept, postpone, or decline the message.
Dispatch messages are handled as follows:
•If a user chooses to accept the message, all other copies of the message are removed from the mailboxes of the other members of the distribution list, regardless of whether the other users have listened to and postponed the message.
•If a user chooses to postpone the message, it remains as an unread message in the mailbox of that user and in the mailboxes of the other members of the distribution list.
•If the user chooses to decline the message, it is removed from the mailbox of that user, but copies of the message remain as unread in the mailboxes of the other members of the distribution list.
•If there is only one copy of the dispatch message remaining, and no user has yet chosen to accept the message, the final user whose mailbox it is in must accept it. That user is not given the option to decline the message.
Dispatch messaging is useful in situations where a team is available to respond to issues, but only one member of the team needs to respond. For example, an IT department may want to set up a call handler to take messages from employees who need assistance, and then send the messages as dispatch messages to a distribution list comprised of IT department staff. All of the members of the distribution list receive a copy of each message. Team members can then decide whether to accept or decline a message; declined messages are then picked up by other team members.
Yeah so far I have it delivering an email message and VM message but I can't seem to find the section where I configure how it calls out to the a group of numbers. I need it to actually call the people because a VM or an email about a VM might not wake people up in the middle of the night .. of course I only need it to call the actual person designated "on call" so if I can only configure one number I'll live but ideally I'd like to be able to input several numbers for it to call.
Is that possible? I might have missed the part of the doc that outlines that.
The call-out piece is independant of the dispatch distribution list. This is called Message Notification and is configured individually on each mailbox; the user can even turn it on/off when they are on call.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...