Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call out MPE

Hi I have a cisco Meeting Place Express version Version: 2.0.3.35, and I Configured the outdial. I enable the H.323 and I set the following parameter:

E.164 address: 9000

H.323 ID : MPE

H.323 Number Type : Unknown

Local H.323 port: 1720

Use gatekeeper: No

H.323 gateway 1 : IP Address of the CCM.

But I cannot call to extension in the Cisco Phone registered in the Cisco Call Manager from the Meeting Place Web Page.

I open a terminal in the SSH and executes the following tests:

[mpxadmin@mpe mpxadmin]$ activity

VUI Configuration: 250 Sessions, 250 Confs

*** VUI INTERNAL STATUS UTILITY ***

DebugMenu:

1) Quick Status of all Ports 4) Make Test Call

2) Verbose Status of Port Range 5) Show All Confs

3) Display complete Port Information 0) Quit

Enter the Command (0 -- 100) []: 4

You entered 4.

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Enter destination for your call: 3003

The Telephone Number is 3003. Len is 4

Do you want specific ports? (t -- F): F

You entered F.

Placing Call .....

And the call is not established...What can I do?

(the MPE as H.323 Gateway in the CCM. And the call from the Cisco Phone to MPE are succesfull)

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Call out MPE

Hi

Check your CSS assigned to the H.323 gateway in CCM is valid (i.e. includes your 3003 extension and others).

Also ensure you've added the 'device name' of the h.323 gateway as the IP address of the MPE server.

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
3 REPLIES
Super Bronze

Re: Call out MPE

Hi

Check your CSS assigned to the H.323 gateway in CCM is valid (i.e. includes your 3003 extension and others).

Also ensure you've added the 'device name' of the h.323 gateway as the IP address of the MPE server.

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Call out MPE

thank you very much for your help, the problem was resolve :D (I check the CSS)

Once again thanks

:D

Greetings from chile

New Member

Re: Call out MPE

Now I go to "E-Mail Service Administration / SMTP Server Configuration" in the MPE !! to the email notification !

270
Views
0
Helpful
3
Replies