Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Call Routing Rule

Hi,

I have setup a Call Routing Rule, to direct calls coming to particular ext to a call handler ,

The call routing rule doesnot work,and the call coming to that ext goes to opening greeting ch,

If I assign the ext assigned to the routing rule to the call handler then it start's working,

Ideally I don't need to assign a ext to a call handler, so what is the issue, why is the call routing rule not working.

Avinash

6 REPLIES
Cisco Employee

Re: Call Routing Rule

Avinash,

This tells me that the call routing rule is not being matched based on the values you've entered for ANI or DNIS. Open Call Viewer from the Tools Depot and watch what digits are being presented to Unity and configure the routing rule accordingly. Also, people get hung up by accidentally configuring a Direct Routing Rule rather than Forwarded Routing Rule.

Hope that helps,

Brad

Re: Call Routing Rule

The value in DNIS matches the value (ext) I see in call viewer, this was the first thing I checked,

So I should create a Forwarding Routing Rule instead of Direct Routing Rule ?

Avinash

Cisco Employee

Re: Call Routing Rule

If the call is being forwarded into Unity from the phone system you'll need to do a forwarded routing rule, yes. It won't hurt anything configuring one.

Brad

Re: Call Routing Rule

how does unity differentiate between a direct call and a forwarded call ?

Cisco Employee

Re: Call Routing Rule

Depends on how the phone system passes the call to Unity. If you call user A, their phone RNA's, it's then [forwarded] to Unity, and will parse through all forwarded routing rules for any matches.

Another example is if you press the voice mail button from your phone, it's then a [direct] call to Unity as there is no forwarding involved and direct routing rules are all parsed for any matches.

Typically administrators will configure CTI route points that CFA to Unity for particular external numbers so that a particular routing rule can always be matched and go to the desired greeting.

Brad

Cisco Employee

Re: Call Routing Rule

Just curious how this one turned out... was it in fact the forwarded rule that needed to be configured?

If so, please rate any useful posts to help those who may run into the issue down the road.

Brad

228
Views
0
Helpful
6
Replies