Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Routing to Voice mail is not working

Hi,

Not able to reach the Voicemail system from PSTN.

We have CUCM cluster integrated with Microsoft Exchange 2010 for Voicemail. We can able to dial the VM Subscriber/Pilot number from the IP Phone directly, however we are not able to reach the Voicemail system when we receive an Incoming call from PSTN to the IP Phone..

I have created a SIP Trunk, Route Pattern pointing to the SIP Trunk, Voicemail Pilot number & Profile defines. Also the VM Profile is associated with the DN of the IP Phone

Can someone help where might be the issue is..

1 REPLY
Hall of Fame Super Red

Call Routing to Voice mail is not working

Hi there,

Can you please check the DN config page in CUCM and see what is set

on the Call Forward No Answer config. Are you hard coding the forwarding DN (VM Pilot)

or using the Voicemail checkbox? Also check the CSS on the Call Forward No Answer

and Call Forward Busy lines.

Cheers!

Rob

632
Views
0
Helpful
1
Replies