CallConnector CCTSDBSVR.exe process at 100% indefinitely
I have installed Cisco Unified CallConnector on two different machines now and after configuration and a subsequent reboot the CCTSDBSCR.exe process starts up and stays at 100%. If I stop all the CallConnector services and restart them it happens again. I have confirmed this to happen on two different machines, one being Windows XP and the other Windows Server 2008. This is the latest version available on the download site right now - 184.108.40.206. Any thoughts?
Re: CallConnector CCTSDBSVR.exe process at 100% indefinitely
I found the problem for those that may run into this. I went back through the Server Setup Wizard and noticed that one of the Server Parameter pages had nothing the IP address field. I simply chose the server IP address from the drop-down, restarted the services and all was well again.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...