Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Called id not displaying on SIP trunk

I ve a SIP trunk to CME.

When I call from CME to CM ,i can see "to called name";for example "to Ahmed"

BUT

the opposite not like that;i can see "to 1000"

NO name is displying even after call is estaplished.

I put the following parameters to allowed on SIP trunk on inbound & outbound calls:

Connected Line ID Presentation*

Connected Name Presentation*

I need to display on caller LCD screen "to called name"

2 REPLIES

Re: Called id not displaying on SIP trunk

yousseff,

The alerting name is a field that is local and used within the CCM, once you go out to a CME or intercluster, they aren't going to work. You need to setup directory services in CME using the 'directory entry' command on the side of the CME. It's a pain, but its the best I know how.

HTH, please rate useful posts.

Chad

New Member

Re: Called id not displaying on SIP trunk

Hi Chad,

But why it is working if i make a h323 trunk to CME through GK??

Actually I can't got yuor point regarding "directory entry" in CME.

Plz describe in more details.

Thx

255
Views
0
Helpful
2
Replies
CreatePlease to create content