Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Caller id on CME according to call type

How i can change caller id on CME 3.3 according to call type( local,international,...)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Caller id on CME according to call type

youssef,

no it doesn't you cannot do masking with this as far as I know, hence the translation profile, its dynamic.

HTH, also people like to show appreciation on these forums by rating things that they find useful or solved their problems..

Chad

5 REPLIES
New Member

Re: Caller id on CME according to call type

I need it to be dynamic caller id;

e.g. 1234XXXX (to represent internal phone number)

Re: Caller id on CME according to call type

under each dial-peer on the CME corresponding to your loca / LD / intl route use a translation pattern on the calling number.

voice-translation rule 1

rule 1 /\(1234\)/ /8099\1/ = 80991234

voice-translation profile CLID

translate calling 1

dial-peer voice 1000 pots

Description ***Long Distance***

destination-pattern 91[2-9]..[2-9]......

translation-profile outgoing CLID

port 0/0/0:23

forward digits 11

HTH, please rate useful posts!

Chad

New Member

Re: Caller id on CME according to call type

Does "clid network-number" do the same function?

Re: Caller id on CME according to call type

youssef,

no it doesn't you cannot do masking with this as far as I know, hence the translation profile, its dynamic.

HTH, also people like to show appreciation on these forums by rating things that they find useful or solved their problems..

Chad

New Member

Re: Caller id on CME according to call type

Thx... CHAD

166
Views
0
Helpful
5
Replies