Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Caller Name in SIP Trunks between CME's

Hi,

I have a few CME's connected via SIP trunks. When a call is made, the caller's name along with the calling number is displayed on the destination phone. How can I stop this name information from being sent over the SIP trunk?

Thanks in advance.

Larry

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Caller Name in SIP Trunks between CME's

Hi Larry,

I would use these commands:

sip-ua

calling-info pstn-to-sip from number set

calling-info pstn-to-sip from name set ""

hth,

nick

2 REPLIES

Re: Caller Name in SIP Trunks between CME's

Hi Larry,

I would use these commands:

sip-ua

calling-info pstn-to-sip from number set

calling-info pstn-to-sip from name set ""

hth,

nick

Community Member

Re: Caller Name in SIP Trunks between CME's

Thanks Nick,

You solved my problem.

Best regards.

Larry

213
Views
0
Helpful
2
Replies
CreatePlease to create content