had problems with Bat templates & Extension Mobility, plus AXL issues in the past. If staying with MS platform, is 4.3 recommended. I have heard that version 7 will be both Linux and Windows and coming out in 2008 2nd quarter? Customer wants to stay with windows - preferrable 2003.
I recommend you to stay in 4.1(3) because at this moments there is no way to upgrade to CCM 5 & 6 from any other version, not sure if it will be the same for CCM 7 but I guess that will be the case. To be honest I had a lot of cases from 4.3(1) when I was in the TAC and in my opinion 4.1(3) is good just with a few less features.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...