12-09-2008 07:22 AM - edited 03-18-2019 10:07 PM
I made an error while installing the cisco callmanager.
I would want to have a publisher and a subscriber on the network.
While getting the licences i used both PAKs with the Publisher's mac-address.
My PAKs are now used,i cant use either of the two to get a licence for the subscriber.
What do i do?
Launching a case with TAC may take a while,am only supposed to be here for a specified time.
Please help me,all you good people out there.
Solved! Go to Solution.
12-09-2008 09:40 AM
Hi Nicholas,
The license for additional Nodes needs to be purchased from Cisco. If you have purchased this already then I would send an email to;
With all the details including;
Corporate Name/Address
PO#
CCM Publisher MAC
And ask them to send you the proper license for both Nodes.
Hope this helps!
Rob
12-09-2008 07:32 AM
Hi Nickolas,
You have done the right thing my friend :) All CCM Licenses should reference the Publisher MAC. The License should reflect 2 Nodes, 1 for Pub and 1 for Sub. The Subscriber MAC should not be used here.
Hope this helps!
Rob
12-09-2008 08:00 AM
But the license report showing on the publisher has only one node license feature.
How do i overcome this/increase the number of nodes to two so it becomes a cluster.
Please help on this,thanks for your quick response.
12-09-2008 09:40 AM
Hi Nicholas,
The license for additional Nodes needs to be purchased from Cisco. If you have purchased this already then I would send an email to;
With all the details including;
Corporate Name/Address
PO#
CCM Publisher MAC
And ask them to send you the proper license for both Nodes.
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: