Using CallManager Serviceability in hybrid topology
In my work we have a hybrid topology that connect a traditional non IP PBX Nortel meridian to a Cisco voice MGCP gateway 3845 Using T1/PRI , all phones are analogue or digital connected directly to the PBX , the voice gateway is connected to CE router which is connected to MPLS cloud
This is the topology : Analogue or Digital phone --ï PBX---ï ISR 3845--ï CE-ï MPLS cloud + CallManager 4.3
We have callmanager cluster that do a signalling and route plan for the MGCP voice gateways, my question is :
With this hybrid topology is it possible to use callmanager serviceability including Real Time Monitoring, CDR Analysis & Reporting to check QoS , traffic, malicious calls using RTMT and CAR Reports sush as :
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...