Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't import CTI Ports in CUE 3.1

Hi Everyone,

I have recently migrated CallManager 4.1 to CUCM 7.1. Everything is working fine but CUE is not able to integrate with CUCM 7.1

I have provided the new credentials for Admin User and JTAPI user in CUE 3.1 and also made a new application user in CUCM 7.1.

When I verify CallManager Admin User in CUE web interface it shows Admin login successful, JTAPI login successful.

But when I try to search and import CTI Ports from CallManager, it shows me the error IOException: No such attribute.

Can anyone please help me with this issue?

Thanks,

Amit.   

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Can't import CTI Ports in CUE 3.1

Hi

See this compatibility chart:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm#CUCM

To run CM7.1, you need to be running 3.2.1 of CUE as a minimum.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

Re: Can't import CTI Ports in CUE 3.1

Hi

See this compatibility chart:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm#CUCM

To run CM7.1, you need to be running 3.2.1 of CUE as a minimum.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Can't import CTI Ports in CUE 3.1

Hi aaronharrison,

Thanks alot for your reply. I will upgrade the CUE to version 3.2.1.

Thanks again..

Amit.

903
Views
0
Helpful
2
Replies
CreatePlease login to create content