hi, I am having issues where I can't log into CRS. I am using CUCMv6 with LDAP sync. My users are all created on Active directory, Active in CallManager. Then during the Cluster setup, i saw all the users and made them CRS Administrators. Then when I finished my cluster setup, went back into CRS and can't log in anymore. Tried to log into a machine that is part of the domain with the user ID to make sure i had the right passwords and that worked...
This is my second time experiencing the same exact issue. Seems to only happen when the CCM is pulling from LDAP. UCCX does not appear to even take an application user from ccm? Does anyone have a work around for this?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...