10-01-2007 02:23 AM - edited 03-18-2019 07:53 PM
Hi all,
I have an UC500, which actually runs CME and Unity Express, and try to start with AvT. I've configured is as sayd in the document:
You can also enter the auto attendant and AvT numbers when running the Cisco Unity Express GUI Initialization Wizard or from the Voice Mail > Call Handling or Administration > Call-in Numbers windows in the GUI.
When i dial the number it says "Unknown number".
Does anyone has any idea where to start troubleshooting?
10-01-2007 02:49 AM
Hi,
I've figured it out myself.
In de UC500 you have to add an dial-peer by hand. This isn't something the wizard does. So i've added:
dial-peer voice 2002 voip
description ** cue Administration via Telephone number **
destination-pattern 400
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
!
And it works.
Hope it's usefull for someone :)
12-10-2007 05:05 PM
This was helpful to me. Thanks.
03-08-2008 04:51 AM
Helped me as well. Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: