Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cannot make outbound calls

I have the following configuration for my interfaces/dial-peers:

trunk group ANALOG

hunt-scheme sequential

translation-profile outgoing FRED trunk group ANALOG
hunt-scheme sequential
translation-profile outgoing FRED

!

voice translation-profile BARNEY

translate called 2

!

voice translation-profile FRED

translate calling 1

!
voice-port 0/0/0:23

translation-profile incoming BARNEY

translation-profile outgoing FRED

!

voice-port 0/1/0

trunk-group ANALOG 4

caller-id enable

!

voice-port 0/1/1

trunk-group ANALOG 3

caller-id enable

!

voice-port 0/1/2

trunk-group ANALOG 2

caller-id enable

!

voice-port 0/1/3

trunk-group ANALOG 1

caller-id enable

!

!

!

mgcp profile default

!

!

dial-peer voice 1 pots

description INCOMING PRI CALLS

incoming called-number .

direct-inward-dial

port 0/0/0:23

!

dial-peer voice 2 pots

description OUTGOING PRI CALLS TO 9911

destination-pattern 9911

port 0/0/0:23

forward-digits 3

!

dial-peer voice 3 pots

description OUTGOING PRI CALLS TO 911

destination-pattern 911

port 0/0/0:23

forward-digits 3

!

dial-peer voice 4 pots

description OUTGOING LOCAL PRI CALLS

destination-pattern 9[2-9].........

direct-inward-dial

port 0/0/0:23

forward-digits 10

!

dial-peer voice 5 pots

description OUTGOING LONG DISTANCE PRI CALLS

destination-pattern 91[2-9].........

direct-inward-dial

port 0/0/0:23

forward-digits 11

!

dial-peer voice 6 pots

description OUTGOING INTERNATIONAL PRI CALLS

destination-pattern 9011T

direct-inward-dial

port 0/0/0:23

!

dial-peer voice 911 pots

trunkgroup ANALOG

description FOR OUTBOUND 911 CALLS

destination-pattern 911

forward-digits 3

!

dial-peer voice 9911 pots

trunkgroup ANALOG

description FOR OUTBOUND 911 CALLS

destination-pattern 9911

forward-digits 3

!

dial-peer voice 7 pots

trunkgroup ANALOG

description LONG DISTANCE OUTBOUND DIAL PEER

destination-pattern 91[2-9]..[0-9]......

forward-digits 11

!

dial-peer voice 8 pots

trunkgroup ANALOG

description LOCAL OUTBOUND DIAL PEER

destination-pattern 9[2-9].........

forward-digits 10 voice-port 0/0/0:23
translation-profile incoming BARNEY
translation-profile outgoing FRED
!
voice-port 0/1/0
trunk-group ANALOG 4
caller-id enable
!
voice-port 0/1/1
trunk-group ANALOG 3
caller-id enable
!
voice-port 0/1/2
trunk-group ANALOG 2
caller-id enable
!
voice-port 0/1/3
trunk-group ANALOG 1
caller-id enable
!
!
!
mgcp profile default
!
!
dial-peer voice 1 pots
description INCOMING PRI CALLS
incoming called-number .
direct-inward-dial
port 0/0/0:23
!
dial-peer voice 2 pots
description OUTGOING PRI CALLS TO 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
!
dial-peer voice 3 pots
description OUTGOING PRI CALLS TO 911
destination-pattern 911
port 0/0/0:23
forward-digits 3
!
dial-peer voice 4 pots
description OUTGOING LOCAL PRI CALLS
destination-pattern 9[2-9].........
direct-inward-dial
port 0/0/0:23
forward-digits 10
!
dial-peer voice 5 pots
description OUTGOING LONG DISTANCE PRI CALLS
destination-pattern 91[2-9].........
direct-inward-dial
port 0/0/0:23
forward-digits 11
!
dial-peer voice 6 pots
description OUTGOING INTERNATIONAL PRI CALLS
destination-pattern 9011T
direct-inward-dial
port 0/0/0:23
!
dial-peer voice 911 pots
trunkgroup ANALOG
description FOR OUTBOUND 911 CALLS
destination-pattern 911
forward-digits 3
!
dial-peer voice 9911 pots
trunkgroup ANALOG
description FOR OUTBOUND 911 CALLS
destination-pattern 9911
forward-digits 3
!
dial-peer voice 7 pots
trunkgroup ANALOG
description LONG DISTANCE OUTBOUND DIAL PEER
destination-pattern 91[2-9]..[0-9]......
forward-digits 11
!
dial-peer voice 8 pots
trunkgroup ANALOG
description LOCAL OUTBOUND DIAL PEER
destination-pattern 9[2-9].........
forward-digits 10

When I try to make an outbound call, it starts to ring throught but is not ringing any outside destination that I call. When I call in, I get a busy signal

Everyone's tags (3)
1 REPLY
Community Member

Cannot make outbound calls

I figured out the issue. The card in the system from when it shipped was FXS card. Once I put on the FXO card, it worked

448
Views
0
Helpful
1
Replies
CreatePlease to create content