06-05-2008 06:44 AM - edited 03-18-2019 09:03 PM
Does anyone know if CM 6.1 is compatible with Unity 4.0 Build 4.0(4)?, I have been looking for the compatibility matrix and cannot locate one on Cisco's site addressing this question.
Thanks.
Solved! Go to Solution.
06-05-2008 06:51 AM
just make sure you have the right TSP
SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
HTH
javalenc
if this helps, please rate
06-05-2008 06:54 AM
Yes, Unity 4.0(4) is supported with CM 6.1. Take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
Hope this helps. If so, please rate the post.
Brandon
06-05-2008 06:51 AM
just make sure you have the right TSP
SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
HTH
javalenc
if this helps, please rate
06-05-2008 06:57 AM
Thanks considerably for the quick response.
06-05-2008 06:54 AM
Yes, Unity 4.0(4) is supported with CM 6.1. Take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
Hope this helps. If so, please rate the post.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: