There is no wizard or tool that Cisco provides which will allow to customize the CCMuser web page. If you are on a Windows based server you could customize the various web application files. However it is likely that you are not on a Windows based platform and you said you don't have programming knowledge. On the appliance model you wouldn't be able to customize the interface even if you were capable of accomplishing the task.
All of the viable options I can think of require some programming experience to accomplish. Sorry I don't have a better answer for you.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...