Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CDR Login

I am attmepting to logon at the CDR login page, but the default admin,admin user/password combo is not working. Is there a way I can determine what users have admin privileges in CDR?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CDR Login

Hi Chris,

Here is some info that may get you started;

Restore a Lost ART/CAR Password in Cisco CallManager 3.3 and 4.x

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00801115eb.shtml#t5

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: CDR Login

Hi Chris,

Here is some info that may get you started;

Restore a Lost ART/CAR Password in Cisco CallManager 3.3 and 4.x

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00801115eb.shtml#t5

Hope this helps!

Rob

Silver

Re: CDR Login

hi gregorysco

For CAR users or administrators?From the web browser, enter

https://:8443/car/Logon.jsp

but Before you log in to CAR, you must configure at least one CAR user that has administrative privileges in CAR:

1: In Cisco Unified CallManager Administration (ccm 5.x), add an end user by choosing User Management > End User

2: Click Standard CAR Admin Users.

3: Click the Add Users to Group button.

4: Check the check box(es) for the users that you want to add to the group and click Add Selected.

in conclusion to know if ur user can log in to CAR or not, when u go to user management --> user group--> Standard CAR Admin Users and do find u will see if ur user/s is/are assigned to this group or not. (i assume CCM 5.x)

hth

please remember to rate helpful posts

/majdi

267
Views
0
Helpful
2
Replies