Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CDR records on CME

Are there any CDR records stored on the CME router or do i need to setup Radius, SYSLOG or FTP? I know there is a log on the web interface, just wondered if you could pull the records off without one of the three methods. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CDR records on CME

You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.

You can use the following commands in config mode:

logging buffered <>

dial-control-mib retain-timer <>

dial-control-mib max-size <>

To view them, use 'show logging'

Thanks,

Adam

Please rate if helpful

1 REPLY

Re: CDR records on CME

You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.

You can use the following commands in config mode:

logging buffered <>

dial-control-mib retain-timer <>

dial-control-mib max-size <>

To view them, use 'show logging'

Thanks,

Adam

Please rate if helpful

228
Views
0
Helpful
1
Replies