I recently had my call manager server crash. I've restored it and got things going now, but one thing is still not working.
We have an overhead ringer that is assigned a DN. At night when the receptionist leaves she forwards all the calls to the night ringer so the shop can then pick up calls after hours. If a call is not answered it would eventually go to the main-number VMB.
Before the crash she was able to hit the CFwdAll softkey and then the messages button and that would set it. What enables this functionality?
Turns out our receptionist misunderstood what happened when she CFwdAll to messages. It wouldn't ring our night bell immediately. It would go to an after-hours call handler and give the caller the option of zeroing out, and then the call would ring overhead.
There was/is no special prgramming needed on the phone.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...