Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Change Dispaly name for outgoings call manager 8.5

How can I change the display name  for outbound calls using MGCP using call manager 8.5 phone use sccp.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Change Dispaly name for outgoings call manager 8.5

The name you send is related to the DN making the call, if you mean you want all calls with a certain name, that's not possible, unless you configure it on every single DN.

There's not a one stop config to do this, assuming that's what you want.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Cisco Employee

Change Dispaly name for outgoings call manager 8.5

Go to one of the DNs you know shows that CNAM, and it should be configured there, just change it as you need.

If it's not, there's the possibility your telco is doing that for you, and then you'll need to ask them to change it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
6 REPLIES
Cisco Employee

Change Dispaly name for outgoings call manager 8.5

The name you send is related to the DN making the call, if you mean you want all calls with a certain name, that's not possible, unless you configure it on every single DN.

There's not a one stop config to do this, assuming that's what you want.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Change Dispaly name for outgoings call manager 8.5

EX: 

When we call outside the office our caller ID displays as: "

Xray GRP HG" on people's phones.

Can we get this changed to simply "Xray"?

New Member

Change Dispaly name for outgoings call manager 8.5

Is the example  I provided possible  ?

Cisco Employee

Change Dispaly name for outgoings call manager 8.5

Go to one of the DNs you know shows that CNAM, and it should be configured there, just change it as you need.

If it's not, there's the possibility your telco is doing that for you, and then you'll need to ask them to change it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Change Dispaly name for outgoings call manager 8.5

I did a search and did not find that name on any descriptions and I will contact the ISP.

Thank you for your help.

Hall of Fame Super Gold

Re: Change Dispaly name for outgoings call manager 8.5

You can check the website mentioned in my profile for a solution to outbound calling name in Canada.

To my knowledge, telco will not set it for you.

211
Views
0
Helpful
6
Replies
CreatePlease to create content