Hello... i need to update line on telephone to convert from 4 XXXX Digit to be 5 XXXXX Digit it will be the same 4 Digit number except i will start with number (8) i try to do that by Bulk but i'm not found how can change the DN number on the telephone , even i try Update Line it Update it give me the line configuration update like Voicemail,CSS,ForwardBusy......etc but i'm not find to change line it self like change from 7230 to be 87230.
If you do it through BAT you would have to delete the DN entirely and re-add it. The problem is that the DN used to be the unique identifier. At some point they added a primary key GUID field to to the record but most of the product UI hasn't stopped treating the DN pattern as the unique record identifier. The only way to do this in bulk is through an AXL script since you can control the DB record directly. Several partners have written scripts to do this but none are giving it away for free to my knowledge.
WARNING 1: Make sure you have a good backup of you CUCM Cluster. (And you know how to restore it !)
WARNING 2: Make sure you test this in a lab before letting it anywhere near your live system.
WARNING 3: Don't blame me if you break you CUCM system. This is low level stuff !
Now, I've covered my rear....
You can do this from the CUCM console:
run sql UPDATE numplan SET dnorpattern = concat('8', dnorpattern)
This will update EVERY directory number in your CUCM DB and prepend an "8" to it. You can use a standard SQL WHERE clause to narrow this down if you want to.
Note that this will not touch any divert settings. Hunt Groups should be fine, though.
Divert settings are a bit more complicated. You need to update the
cfnadestination, cfnaintdestination, cfbdestination, cfbintdestination, cfurdestination, cfurintdestination fields on the numplan table. As a pointer in the right direction you'd want something like (This is untested):
run sql UPDATE numplan SET cfnadestination = concat('8', cfnadestination) WHERE len(cfnadestination)=4
The WHERE clause is there to try to stop you updating numbers that aren't extension numbers.
The divert all settings are stored in another table and make life that little bit more fun...
If you have UCC(X), Unity, etc. I have *NO* idea how this will interact with them (I don't use them)
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4