Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

change password attempts until lockout meeting place express 2.0

Hi,

Page 11-11 of the MPE 2.0 docs has the following:

About Locked Profiles

User profiles can be locked by two methods:

•The system automatically locks a user profile after a configurable number of failed user login attempts.

I cannot find where to change the configurable # of attempts...

I am opening a case with TAC, but was hoping somebody else would have this handy.

Thanks in advance,

Eric

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: change password attempts until lockout meeting place express

Hi Eric,

Check out Page 111 of this MPE 2.0 doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace_express/2_0/english/administration/guide/cm20pgrf.pdf

Maximum profile login attempts

Number of consecutive login attempts within a session

before a user profile is locked.

A value of 0 means that user profiles are never locked due

to failed login attempts.

Before reaching the maximum number of login attempts,

the user may restart the counter by taking one of the

following actions:

• Close the browser and open a new one.

• End the call to Cisco Unified MeetingPlace Express

and begin a new call.

Restriction: The system administrator and guest profiles

cannot be locked.

Range: 0 to 255

Default: 3

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: change password attempts until lockout meeting place express

Hi Eric,

Check out Page 111 of this MPE 2.0 doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace_express/2_0/english/administration/guide/cm20pgrf.pdf

Maximum profile login attempts

Number of consecutive login attempts within a session

before a user profile is locked.

A value of 0 means that user profiles are never locked due

to failed login attempts.

Before reaching the maximum number of login attempts,

the user may restart the counter by taking one of the

following actions:

• Close the browser and open a new one.

• End the call to Cisco Unified MeetingPlace Express

and begin a new call.

Restriction: The system administrator and guest profiles

cannot be locked.

Range: 0 to 255

Default: 3

Hope this helps!

Rob

New Member

Re: change password attempts until lockout meeting place express

Thanks Rob!

(For everybody else:

Click System->usage configuration -> 5th option down is failed login attempts.)

232
Views
0
Helpful
2
Replies
CreatePlease to create content