Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already installed?

Good Morning Everybody,

I'm installing a new CME router with CUE.

But, the ISM-SRE-300-K9 is empty, I don't if it's normal.

I try to install two different packages :

Version 8.5.1

cue-installer.sme.8.5.1

cue-vm-full-k9.sme.8.5.1.prt1

cue-vm-installer-k9.sme.8.5.1.prt1

cue-vm-k9.sme.8.5.1.key

cue-vm-k9.sme.8.5.1.pkg

cue-vm-k9.sme.8.5.1.pkg.install.sre

cue-vm-k9.sme.8.5.1.pkg.install.sre.header

cue-vm-langpack.sme.8.5.1.pkg

Version 8.6.1

cue-installer.SPA.sme.8.6.1

cue-vm-full-k9.SPA.sme.8.6.1.prt1

cue-vm-installer-k9.SPA.sme.8.6.1.prt1

cue-vm-k9.SPA.sme.8.6.1.key

cue-vm-k9.SPA.sme.8.6.1.pkg

cue-vm-k9.SPA.sme.8.6.1.pkg.install.sre

cue-vm-k9.SPA.sme.8.6.1.pkg.install.sre.header

cue-vm-langpack.sme.8.6.1.pkg

Without success...

I try with two differents FTP server (Linux and Windows), connection and session seems ok with Wireshark, but, module go to loop, without installation success.

Different try :

Version 8.5.1

==========

Router#$0 status

Service Module is Cisco ISM0/0

Service Module supports session via TTY line 67

Service Module is trying to recover from error

Service Module heartbeat-reset is enabled

Service Module is in fail open

Service Module status is not available

Module resource information:

  CPU Frequency: 1068 MHz

  Memory Size: 493 MB

  Disk 0 Size: 4110 MB

Install of ftp://*****:*****@10.10.80.68/Downloads/cue-vm-k9.sme.8.5.1.pkg in progress

Install status : Waiting for file request

Local Partition Info - (0 apps)

=====================

  Retrieving partition information

Router#

Feb 16 06:04:22.583: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:29:03.839: %SYS-5-CONFIG_I: Configured from console by vty0 (10.10.80.68)

Feb 16 06:29:19.915: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:30:01.283: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:30:21.711: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:30:42.143: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:31:02.571: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:31:22.995: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Feb 16 06:31:22.999: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:31:43.419: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:32:03.843: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:32:45.275: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:33:05.699: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:33:26.119: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:33:46.543: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:34:06.979: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Feb 16 06:34:06.983: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:34:27.399: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:34:47.831: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:35:29.263: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:35:49.687: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:36:10.119: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:36:30.563: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:36:50.983: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Feb 16 06:36:50.987: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:37:11.467: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:37:31.887: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:38:13.399: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:38:33.815: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Feb 16 06:38:54.243: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File RequestConnection closed by foreign host.

Version 8.6.1

==========

Router#$@10.10.80.68/Downloads/cue-vm-k9.SPA.sme.8.6.1.pkg

Proceed with installation? [no]: yes

Feb 16 07:16:21.235: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Loading Downloads/cue-vm-k9.SPA.sme.8.6.1.pkg.install.sre !

[OK - 38648/4096 bytes]

No local store partition

Following languages are available for installation.

  #       SKU    Language Code           Language Name

------------------------------------------------------------

  1       ARA         ar_SA          CUE Voicemail Arabic

  2       DAN         da_DK          CUE Voicemail Danish

  3       DEU         de_DE          CUE Voicemail German

  4       ENG         en_GB          CUE Voicemail UK English

  5       ENU         en_US          CUE Voicemail US English

  6       ESO         es_CO          CUE Voicemail Latin American Spanish

  7       ESP         es_ES          CUE Voicemail European Spanish

  8       ESM         es_MX          CUE Voicemail Mexican Spanish

  9       FRC         fr_CA          CUE Voicemail Canadian French

10       FRA         fr_FR          CUE Voicemail European French

11       HUN         hu_HU          CUE Voicemail Hungarian

12       ITA         it_IT          CUE Voicemail Italian

13       HBR         iw_IL          CUE Voicemail Hebrew

14       JPN         ja_JP          CUE Voicemail Japanese

15       KOR         ko_KR          CUE Voicemail Korean

16       NLD         nl_NL          CUE Voicemail Dutch

17       NOR         no_NO          CUE Voicemail Norwegian

18       PTB         pt_BR          CUE Voicemail Brazilian Portuguese

19       PTG         pt_PT          CUE Voicemail Portuguese

20       RUS         ru_RU          CUE Voicemail Russian

21       SVE         sv_SE          CUE Voicemail Swedish

22       TUR         tr_TR          CUE Voicemail Turkish

23       CHS         zh_CN          CUE Voicemail Simplified Chinese (PRC)

24       ZHH         zh_HK          CUE Voicemail Hong Kong Chinese

25       CHT         zh_TW          CUE Voicemail Traditional Chinese (Taiwan)

You can install upto 5 language(s) on this platform.

Please select the language(s) you want to install by entering the language number(s)

Languages can be entered as comma separated or space separated list

Example: 1,3 would select 'CUE Voicemail Arabic' and 'CUE Voicemail German'

Enter languages:4

Following languages will be installed on the system:

CUE Voicemail UK English

Do you want to continue with the selected options?(y/n):y

Router#

Feb 16 07:16:50.579: %SM_INSTALL-6-INST_RESET: ISM0/0 is reset for software installation.

Feb 16 07:17:11.235: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Feb 16 07:17:11.239: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

===========================

on the service-module ism0/0 session

===========================

Initializing memory. Please wait...

Memory initialization OK. Continue...

Feb 16 07:25:08.683: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

DDR Memory 0512 MB detected

Genuine Intel(R) processor              1.06GHz

BIOS ISM 2.6,  BIOS Build date: 10/16/2009

System now booting...

Authenticating boot loader....

Primary Boot Loader Authenticated - booting....

Please enter '***' to change boot configuration:

Detect and Initialze network device

Backup current platform configurations....

SRE step 1 - SM registration...

SRE step 2 - SM requests key file info...

!!! Opcode Error - Get a wrong RBIP frame !!!

Feb 16 07:25:29.259: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration Request

Feb 16 07:25:29.263: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Time-out from RBIP response wait loop

SRE step 3 - SM stores registration info...

Updating flash with bootloader configuration.

Please wait .............. done.

SRE step 4 - SM downloads key-file...

-

!!! Opcode Error - Get a wrong RBIP frame !!!

Writing keyfile to flash Size 891

writing complete.

SRE step 5 - SM requests installer info...

Feb 16 07:25:49.791: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

SRE step 6 - SM stores installer info...

Updating flash with bootloader configuration.

Please wait .............. done.

SRE step 7 - SM now downloads installer

|

!!! Opcode Error - Get a wrong RBIP frame !!!

Feb 16 07:26:10.343: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Requestdone.

SRE step 8 - SM requests tcl header file info...

!!! Opcode Error - Get a wrong RBIP frame !!!

Feb 16 07:26:52.919: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Time-out from RBIP response wait loop

SRE step 9 - SM now downloads the tcl header file

|

!!! Opcode Error - Get a wrong RBIP frame !!!

TCL header file downloaded completely size: 691

SRE step 10 - SM requests tcl file info...

Feb 16 07:27:13.467: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File Request

Time-out from RBIP response wait loop

SRE step 11 - SM now downloads the tcl file

-

!!! Opcode Error - Get a wrong RBIP frame !!!

Feb 16 07:27:34.011: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP File RequestTCL file downloaded completely size: 691

SRE step 12 - SM now boots Installer

Verifying ...

Corrupted netboot image  detected

done.

Starting Kernel.

loop ....

I have no idea to solve my problem...

If anybody have suggestion, should be great.

Have a nice day !

Thanks

Fab

Everyone's tags (2)
6 REPLIES
Hall of Fame Super Gold

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already instal

Manual CUE image installation

Prepare tftp and ftp server

Console to CUE, interrupt boot with ***

Configure to boot the installer image from network, then go from there.

New Member

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already instal

Hi,

I try that. From this guide :

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_0/installation/guide/upg3boot.pdf

with windows xp tftpd32

computer config : 192.168.1.4/24

ftp server 192.168.1.3 /24

Router int g0/0 192.168.1.1 255.255.255.0 + ip route 192.168.1.2 255.255.255.255 ism 0/0

ISM :

ServicesEngine boot-loader> show config                                       

IP addr:                    192.168.1.2

Netmask:                    255.255.255.0

TFTP server :                    192.168.1.4

GW IP addr:                    192.168.1.1

Default Boot:                    disk

Bootloader Version:          2.1.18

Bootloader Name:          bootloader

Default Helper-file:          cue-installer.sme.8.5.1

Default bootloader:          primary

From Computer :

C:\Documents and Settings\f>ping 192.168.1.2 -t

Pinging 192.168.1.2 with 32 bytes of data:

Reply from 192.168.1.2: bytes=32 time<1ms TTL=126

...

Icmp from ism to computer: no response.

from ism to router int g0/0 : no response too.

router to ism (boot-loader): ok

pc to ism (boot-loader) : ok

So when I try "boot helper" , the request tftp didn't come to my computer.

ServicesEngine boot-loader> boot helper                                       

Loading tftp://192.168.1.4/cue-installer.sme.8.5.1 ...

ServicesEngine boot-loader>                                                   

Thank you for your help.

New Member

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already instal

Hi

I solve my trouble using tftp server from router.

Installation progress...

Thanks

Hall of Fame Super Gold

Re: Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already in

You're welcome, remember to useful posts clicking on the stars below.

Hall of Fame Super Gold

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already instal

This happened to me today with a new ISM. I could not do the manual installation as I usually recommend, because the corrupt image error. I'm don't know why that happens, as it's supposed to be working.

So I did 'service-module install url' and that worked just fine. It also avoids setting up a tftp server install.

New Member

Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already instal

Hi Fabien,

I have a quick question regarding ISM-SRE-300-K9. When you installed the load onto a blank ISM, did it also install the CUE 2-Port Non-Rehostable? I am wondering if I order the module blank whether installing the software package will include the base 2-port license.

Thank you.

Jordan

8315
Views
0
Helpful
6
Replies
CreatePlease login to create content