Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco call manager 6.x

where will i find a guide that helps me configure a cisco call manger 6.x with a cisco CME 2801 router ???

3 REPLIES
Cisco Employee

Re: Cisco call manager 6.x

exactly what are you trying to configure?

your post does not provide enough information to help you

javalenc

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Cisco call manager 6.x

i hav a 2801 router which has some ip phones connected to it, and i hav a call manager 6.x i want to interconnect these two in such a way that the call manager becomes a publisher nd the 2801 is the subscriber that is the 2801 will send the call records to the call manager...

Cisco Employee

Re: Cisco call manager 6.x

ok, you can have the phones with either CUCM or CME, but not with both. in any case what you would need to use is CUCM + SRST

the terms PUB and SUB are only used in CUCM environments, not with CME.

there's plenty of material within CCO

and here:

http://www.cisco.com/univercd/home/home.htm

since you're new you will need to start reading a lot if you really want to learn

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
199
Views
4
Helpful
3
Replies