We upgraded from Cisco CallManager 3.x which we had integrated with Salesforce using the Cisco TSP and the Cisco SalesForce Adpater. After upgrading to Cisco CallManager 7.1.5 the TSP does not seem to pull up the lines to choose in the Salesforce.com adapter "configure" screen.
I then tried upgrading the TSP to Cisco Unity-CM TSP 7.0.4b and after configuring the test runs successfully but I still don't see any lines in the Salesforce.com adapter "configure" screen.
The Unity-CM TSP's are specifically for Cisco Unity. You might want to try the TSP provided with that version of CUCM, which may be found in Cisco Unified CM Administration, under Application -> Plugins (Cisco Telephony Service Provider).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...