10-14-2010 06:43 AM - edited 03-19-2019 01:44 AM
Hello.
We would like to virtualize a Cisco Callmanager and a Cisco Presence on a Cisco UCS Platform.
We have few users (about 50), which will use both a Cisco IP Phone and a Cisco Personal Communicator.
Our questions are:
Thanks in advance for your help.
Best regards.
Solved! Go to Solution.
10-14-2010 07:32 AM
This are the HW compatibility matrix for both which covers where this is supported.
For CUCM you need 8.0(2) and above.
AFAIK currently CUPS cannot be co-res, should be in a future release.
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
10-14-2010 07:32 AM
This are the HW compatibility matrix for both which covers where this is supported.
For CUCM you need 8.0(2) and above.
AFAIK currently CUPS cannot be co-res, should be in a future release.
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
04-05-2011 02:19 AM
Hello all,
I too, am looking to install UCSInstall_CUP_8.5.2.10000-49.sgn on UCS B200 M2 hardware.
The release notes for 8.5.2 (located here) state that UCS M1 and M2 hardware is supported:
< From the linked doc >
–Cisco Unified Computing System B-series blades or Cisco Unified Computing System C-series rackmount servers. For information about these Cisco Unified Computing System servers, see the Hardware and Software Compatibility Information for Cisco Unified Presence Release 8.x.
So on to the Hardware and Software Compatibility Information for Cisco Unified Presence Release 8.x (located here) :
MCS Platform Model Cisco Unified Presence Software Releases EOL Announcement EOS Date Last Ship Document NoUCS-B200M1Supported (new install)SupportedUCS-B200M2Hardware Not ReleasedSupported (new install)UCS-C200M2Hardware Not ReleasedSupported (new install)UCS-C210M1Supported (new install)SupportedUCS-C210M2Hardware Not ReleasedSupported (new install)
Well, we know the hardware is release... (I have that running). Once you insert the CD/DVD in the virtual CDROM, the application suggests it cannot find a driver. I can only assume this is due to the CD/DVD not knowing about the B200 M2 hardware (probably raid card).
Can anyone suggest where I might find a driver disk for this server that will work with the UCSInstall_CUP_8.5.2.10000-49.sgn installation DVD?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: