I want to know how can we customize cisco phone userinterface. For example i want to create a button on the cisco phone through which users can click on that button and automatically the call get generated. I dont want them to dial the whole number just a touch of that button and they can get connected with the support person.
To an extent, yes - but I'd use "customize" loosely. You can control the Phone Button template assigned to a phone and from there customize what each button is used for but there are limits based on the capabilities of CUCM as to how far this goes. For example, you use phone button templates, customized softkey templates, and so forth to provide the capabilities you need but those things are inherent to the system.
If your example is essentially your idea of "customization" then this isn't really custom at all and Java addressed how to do that. It's called Speed Dial.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...