I have to deploy MRA via Cisco Expressway C/E but I have a question which i hope you can help me with. Today i have downloaded the license keys with this options included for the Cisco Expressway-E and they came in a PAK:
Where the LIC-EXP-SERIES option activated the Expressway-C feature, and LIC-EXP-E option activated the Expressway-E feature. The license keys with this options I downloaded them from a PAK so I utilized the virtual serial number of the VCS Virtual Machine. But this just set up Expressway-C o Expressway-E at a time. Can the Expressway-C and Expressway-E stay in the same VM and perform both functions? Or Do I have to request the other license Key for the other VCS Virtual Machine gets activated with the Expressway-C feature?
I hope you can help me with this doubt that came up.
One more question, Can VCS Control be deployed with Expressway-E, I mean VCS Control act as Expressway-C? I have undertood VCS Control is deployed with VCS Expressway and Expressway-C is deployed with Expressway-E, can these deployments be mixed?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...