Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Mobile 8.0 for iPhone

Hello,

I need to explain to my customer interoperability between CUCM and Apple iPhone, Nokia E52, SIP Third-party device ...

I configured "Dual-mode phone for iPhone" device in my CUCM company, and it works very well!

I installed a new DEMO CUCM, but "Dual-mode phone for iPhone" device doesn't work! When I try to connect my iPhone to new DEMO CUCM, device gives me this error: "Failed to register with the supplied information".

In the new DEMO CUCM, i have only configure  Device Pool, Partition, CSS ... below, in attach, you can find my "Dual-mode phone for iPhone" device on new DEMO CUCM configuration.

Any ideas?

Thank you!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: Cisco Mobile 8.0 for iPhone

Go to CUCM > System > Servers.

Are you using hostname or IP address there?  If your iPhone cannot resolve the hostname there, you should change the hostname to IP address (on CUCM).

Michael

http://htluo.blogspot.com

4 REPLIES
Red

Re: Cisco Mobile 8.0 for iPhone

Go to CUCM > System > Servers.

Are you using hostname or IP address there?  If your iPhone cannot resolve the hostname there, you should change the hostname to IP address (on CUCM).

Michael

http://htluo.blogspot.com

New Member

Re: Cisco Mobile 8.0 for iPhone

OK,

it works!

Thank you!

New Member

Re: Cisco Mobile 8.0 for iPhone

This was driving me a little nuts in our test lab ... no FQDN on the CUCM service, changed to IP - works fine.

Thanks...

New Member

Cisco Mobile 8.0 for iPhone

Do I need a lincence  this services, Ih we need a licence how can add licence the system,

2777
Views
5
Helpful
4
Replies
CreatePlease to create content