Hi All,
Hope one of you will be able to help or point me in the right direction.
CUCM and CUC are both 9.1.1,
CUCM to CUC is SCCP
CUCM to IPC Unigy is SIP
Dial plan on CUCM is E164
Dial Plan on Unigy is 4 digits
CUC account has the Unigy 4 digit extension set as a alternate MWI
I have created a specific 4 digit route pattern pointing to the IPC unigy sip trunk
If I dial the MWI on and off numbers from the dealer board I can see them hit the CUCM but get NU played back from the dealer board
Sip trunk from IPC Unigy has the CUC partition in its CSS
The Unity ports CSS have access to the 4 digit route pattern pointing to the IPC unigy.
Thanks
Matthew
