after reading the configuration guide ( Configuring Client Computers for Cisco UC Integration for Microsoft Lync ) i just can´t make Cisco UC to start.I´m always seeing the same error in MS client Lync:
a) disabled windows firewall and other similar services.
b) Uncheck the "Check for publisher's certificate revocation in the Security section in IE settings.
c) cucimoc.exe service is running.
d) The manual states that it should be an entry in the registry but i´ve confirmed that this entry IS NOT created in "HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\AdminData"
Assuming you reviewed your configuration of the device/user here is what I ran into few months back that matches your issue:
Bug “CSCth90767 CUCIMOC Login Fail when Windows Update KB979909 and KB976769v2 are installed. “
To Resolve Go to Start – Run – and type “ncpa.cpl” The network connections should be displayed In the Toolbar there should be an “Advanced” Menu (On Windows 7 you may need to press Alt to see the toolbar) In it choose “Remote Access Preferences” or “Dial-up Preferences” Under the section “Enable autodial by location” untick every item
tnx for the quick reply but this didn´t resolved the issue and i don´t know want more to do.
is there a way for me to troubleshoot just the UC framework?
i´ve also got another question for the audience . Why does cisco states the presence of [HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\] entry and I don´t see this in my laptop?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...