Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco SPA301-G3 IP phone

Hi

I'm trying to find/or do I need the sgn file to get the above phone onto our system.  We are using CUCM v9.1.2

I've got the firmware files, but I cannot find out if thats all that is required, any help would be greatly appreciated.

Thanks in advance

Regards

Nick.

2 REPLIES
Cisco Employee

There are no files required

There are no files required as SPA devices are all considered SIP 3rd party endpoints as far as CUCM in concerned, so, you won't find any files for them to use with CUCM.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Hi Jamie

Hi Jamie

Thanks for the info, I've tried to configure the phone as a 3rd party SIP device, but it still is not recognised.

I went into the gui of the phone, and all I get is the SPA301 device info screen, I dont get an admin login like the websites suggest. I've reset the phone many times, but nothing seems to allow me to configure it to work with CUCM v9.1.3.

Regards

Nick.

57
Views
0
Helpful
2
Replies
CreatePlease to create content