Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco TSP 6.1 and IP Phone 7941

Hello,

I have the CUCMA 6.1 and I have installed on a server the Cisco TSP.exe version 6.1 in order to have the status info of the extensions.

It works very good.

I also hve these IP Phones:

- 7941

- 7961

At this point I would like, using the TSP functions, to send a Lamp ON/OFF command to the ip phones.

I saw that it is possible, but is there a "lamp ID" ?

I'm asking you this because I'm using a Tapi interface which permits me to program under Vb.Net environment and this interface(is a dll) permits me to send this command to the ip phone:

TapiPhoneSetLamp(DevID,LampID,Flash)

at this point my question is, where can I find the Lamp ID ?

Can you help me plese?

Thank you very much in advance!

1 REPLY
New Member

Re: Cisco TSP 6.1 and IP Phone 7941

16:05:41.625 CCM|StationD - stationOutputSetLamp stim: 9=Line

instance=1 lampMode=LampOn tcpHandle=0x4fbbc30

This is a trace of a lampOn request from callmanager to the IP phone. The tcpHandle is the IP address of the phone hashed! Hope this helps!

141
Views
0
Helpful
1
Replies