Cisco Unified CallConnector UCC shared lines/second line status
We have Cisco Unified CallConnector server 1.5 installed. Under the contacts it only shows the status of the primary extension. Our phones are configured with incoming calls going to shared lines which appear as line 2,3,4,5,6 on the phones. If a call is answered on line 2 to 6 it does not update the phone status in the contacts. I checked the documentation and it refers to a check box for Server Options - publish call information for shared lines but this is missing from the menu options in the software. Please let me know if this is a feature that will be added or if there is a setting that I need to change. Thanks.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...